Mobile Garage car cover

The high-quality Mobile Garage cover is a product tailored to the needs of drivers. The cover is made of a 4-layer material that is thick, strong, and durable. The cover protects the entire car from harmful environmental influences. The Mobile Garage cover provides adequate protection for your vehicle throughout the year. Its functionality can be appreciated in every season. In winter, it prevents snow, frost, and ice from settling on the car and is resistant to freezing; in autumn, it protects against rain, wind, leaves, and tree sap; and in summer and spring, it protects against UV rays, dust, and bird droppings.

The unique properties of the multi-layer material ensure that the cover is waterproof, while allowing water vapor to escape from under the cover.  Any moisture that accumulates under the cover will quickly evaporate, preventing rust and mold from forming on the car. The cover is suitable for both temporary and long-term use. The cover can be hand washed at 40 degrees Celsius. The cover is gray, which is extremely practical and looks great. The center of the cover features the manufacturer's name and logo, as well as the name of the material from which it is made, guaranteeing the originality and high quality of the product. The variety of shapes and sizes means that you can choose a cover that fits your car perfectly. 

Material composition: 4 layers

-double-layer SPUNBOND

-functional film membrane

-single-layer SPUNBOND

The top of the cover is waterproof and vapour-permeable. It does not get wet, while wicking moisture away from under the cover. Smooth SPUNBOND on the inside, does not scratch the vehicle.

The sides of the cover are double-layered, made of double-layer SPUNBOND non-woven fabric. The sides of the cover are highly vapour-permeable and very water-resistant.

.

A car covered with a regular cover, standing on wet ground in a 'water vapour bubble', is exposed to damage. When the wet ground evaporates, all the water vapour settles on the car, which can cause significant damage to the paintwork and also lead to mould growth. A car covered with our cover is not exposed to these factors, as it allows all the water vapour to evaporate and escape outside. Your car will be safe in our cover. Competitors' covers are often completely airtight and do not allow water vapour to pass through, which can be very dangerous for your car and cause more harm than good.

.

Product advantages:

• multi-season product;
• protection against: snow, frost, rain, wind, leaves, tree sap, UV radiation, bird droppings, pollen;
• protects against: corrosion, fading, tarnishing of paintwork and chrome elements;
• smooth underside material does not scratch the vehicle;
• covers the entire vehicle, slightly overlapping underneath;
• easy to store and transport - does not take up much space;
• thanks to the fastening with a rope puller and additional elastic fastening straps, it stays firmly attached to the vehicle;
• at above-zero ambient temperatures, it removes moisture accumulating under the cover to the outside.

.

When choosing a tarpaulin, we recommend that you consider the shape and length of your car first and foremost. The determining factor is a photograph showing the shape of the car that the cover fits.

1. Compare the shape of your car with the product photo.
2. You should measure your car, paying particular attention to its length.
3. The final dimension is the circumference of the car, measured at the height of the bumper (the circumference of the car must not exceed the dimension specified in the tarpaulin description – it must be slightly smaller or equal).

The textile material from which the tarpaulin is made will fit both slightly smaller and larger cars of a similar shape and size not exceeding the circumference specified above.

-

The safety of our Mobile Garage tarpaulins has been confirmed in our long-term tests and in a study conducted by an independent research institute.

-

Representative samples of the material used to manufacture Mobile Garage covers were tested at the BOSMAL Automotive Research and Development Institute. The testing was carried out in accordance with the PN-ISO 4892-2:2013-6 standard, method A, cycle no. 1, consisting of a dry phase during which the samples are exposed to a xenon lamp emitting the full spectrum of sunlight with increased intensity, and a phase of rain exposure. Below is an excerpt from the standard:

The test was performed on three car body samples with paint coatings made using the same technology and the same paints as those used in the paint coatings of modern cars.

A Mobile Garage membrane was applied to the samples, which were then placed in an ageing chamber with a xenon lamp emitting full-spectrum sunlight with increased intensity and additional rainfall. The temperature in the chamber was raised to 38 degrees to simulate the conditions prevailing on sunny and rainy summer days, when painted surfaces are exposed to the greatest wear and tear.

The report prepared after the test confirms that the body panels covered with a section of the Mobile Garage cover did not undergo any changes. The paint coating remained the same after the test as it was before the test.

.

Quality and durability were proven by testing

The durability of the tarpaulins is determined by their resistance to sunlight (UV), high temperatures, rain, frost, snow and natural dirt. Our specialists have developed effective methods for testing the resistance of materials to outdoor conditions based on their long-standing environmental tests and test standards PN-EN ISO 4892-3. Every batch of materials from which Kegel-Błażusiak covers are produced is carefully examined in the Atlas UVtest ageing chamber from the USA. Thanks to the quality control of materials and long-term environmental tests, we guarantee our customers several years of the durability of our tarpaulins and covers even in intensive use. 

Functionality and security proven by tests

Good tarpaulin covers should not only protect the car from precipitation, pollution and sunlight but should also be safe.  These are our Kegel-Błażusiak covers-tarpaulins. Our specialists carry out long-term tests of our covers-tarpaulins. We carry out tests for the effectiveness of protection of the vehicle by the cover-tarpaulin against weather conditions and water resistance, steam evacuation from under the cover, the safety of the cover for the vehicle paint coating and the effectiveness of fastening the cover on the vehicle in normal and extreme weather conditions. Our company Kegel-Błażusiak produces only those products that pass long-term tests.

100% polypropylene

1 car cover + bag

Watch INSTALLATION VIDEO

.

Before fitting the cover to the car, fold down the side mirrors and fold or unscrew the aerial. Place the cover on a clean and dry car with the printed side facing outwards. To facilitate the right positioning of the cover on the vehicle, the label marked “ FRONT” has been sewn into the cover on the front and the label marked “REAR” into the back of the cover (the markings correspond to the front and back of the vehicle)

• Tighten and tie the lower cord of the cover, taking care to cross the cords to form the first knot, then tighten the cords firmly, directing the forces parallel to the rear edge of the vehicle (see Drawing no 2 on external cover label).
• Tie the drawstrings and check that the knot does not loosen when pulled. If the knot loosens, repeat the operation by changing the tying method.
• Thread additional drawstrings through the loops sewn into the lower edge of the cover next to the car wheels and attach the cover to the car rims (do not attach to hubcaps).

The bag in which the cover is packed is used to store the cover when not in use. The bag is vapour-permeable; however when folded it will not dry out and therefore it is recommended to keep the bag dry.

.

Kegel-Błażusiak Sp. z o.o., KEGEL-BŁAŻUSIAK, ul. Składowa 26, 34-400 Nowy Targ, Polska, e-mail: info@kegel24.pl, telephone: +48 885 779 943