Wheel dumper protection cover

Waterproof cover to protect a dumper stored outdoors from adverse environmental influences. Also suitable for indoor use. Protects against rain, snow, frost and sunlight (harmful UV rays) as well as contaminants such as dust, bird droppings and tree sap. Waterproof and "breathable" membrane cover that draws moisture out from under the cover.

The unique properties of the multi-layer material ensure that the cover is waterproof, while allowing water vapor to escape from under the cover.  Any moisture that accumulates under the cover will quickly evaporate, preventing rust and mold from forming on the car. The cover is suitable for both temporary and long-term use. The cover can be hand washed at 40 degrees Celsius. The cover is gray, which is extremely practical and looks great. The center of the cover features the manufacturer's name and logo, as well as the name of the material from which it is made, guaranteeing the originality and high quality of the product. The variety of shapes and sizes means that you can choose a cover that fits your car perfectly. 

Material composition: 4 layers

-double-layer SPUNBOND

-functional film membrane

-single-layer SPUNBOND

The top of the cover is waterproof and vapour-permeable. It does not get wet, while wicking moisture away from under the cover. Smooth SPUNBOND on the inside, does not scratch the vehicle.

The sides of the cover are double-layered, made of double-layer SPUNBOND non-woven fabric. The sides of the cover are highly vapour-permeable and very water-resistant.

.

-

The safety of our Mobile Garage covers has been confirmed in our long-term tests and in a study conducted by an independent research institute.

-

Representative samples of the material used to manufacture Mobile Garage covers were tested at the BOSMAL Automotive Research and Development Institute. The testing was carried out in accordance with the PN-ISO 4892-2:2013-6 standard, method A, cycle no. 1, consisting of a dry phase during which the samples are exposed to a xenon lamp emitting the full spectrum of sunlight with increased intensity, and a phase of rain exposure. Below is an excerpt from the standard:

The test was performed on three car body samples with paint coatings made using the same technology and the same paints as those used in the paint coatings of modern cars.

A Mobile Garage membrane was applied to the samples, which were then placed in an ageing chamber with a xenon lamp emitting full-spectrum sunlight with increased intensity and additional rainfall. The temperature in the chamber was raised to 38 degrees to simulate the conditions prevailing on sunny and rainy summer days, when painted surfaces are exposed to the greatest wear and tear.

The report prepared after the test confirms that the body panels covered with a section of the Mobile Garage cover did not undergo any changes. The paint coating remained the same after the test as it was before the test.

.

Quality and durability were proven by testing

The durability of the tarpaulins is determined by their resistance to sunlight (UV), high temperatures, rain, frost, snow and natural dirt. Our specialists have developed effective methods for testing the resistance of materials to outdoor conditions based on their long-standing environmental tests and test standards PN-EN ISO 4892-3. Every batch of materials from which Kegel-Błażusiak covers are produced is carefully examined in the Atlas UVtest ageing chamber from the USA. Thanks to the quality control of materials and long-term environmental tests, we guarantee our customers several years of the durability of our tarpaulins and covers even in intensive use. 

Functionality and security proven by tests

Good tarpaulin covers should not only protect the car from precipitation, pollution and sunlight but should also be safe.  These are our Kegel-Błażusiak covers-tarpaulins. Our specialists carry out long-term tests of our covers-tarpaulins. We carry out tests for the effectiveness of protection of the vehicle by the cover-tarpaulin against weather conditions and water resistance, steam evacuation from under the cover, the safety of the cover for the vehicle paint coating and the effectiveness of fastening the cover on the vehicle in normal and extreme weather conditions. Our company Kegel-Błażusiak produces only those products that pass long-term tests.

100% Polypropylene

Place the cover with the printed side facing outwards on a clean and dry dumper, without covering the loading area. To facilitate the correct positioning of the cover on the trolley, there is a FRONT label sewn into the front of the cover and a REAR label sewn into the back of the cover (the markings correspond to the front and back of the trolley). Fastening straps are sewn into the bottom edge of the cover, all of which should be threaded under the trolley through the nearest structural element of the trolley for each strap, then fastened with buckles and tightened. Next, cross the tie-down straps to form the first knot, then pull the straps tight, directing the force parallel to the rear edge of the trolley (see figure 2 on the cover label). Tie the tie-down straps and check that the knot does not loosen when you pull on the tie-down strap. If the knot loosens, repeat the procedure, changing the way you tie it.